Create a new Global level CSB
- In ProjectWise Administrator, under Global level and select . , right-click on the
- In the New Configuration Block Properties dialog, enter the following as the Name and Description for the CSB then click Apply.
- In the Configuration tab click '+' and select Add Variable.
- In the New variable dialog define the following variable information and click Add to add the new variable:
- In the Edit Value dialog that displays, set the following values and click OK:
- Click OK in the New variable dialog
- In the New Configuration block properties dialog, under the Configuration tab, click '+' and select Add variable.
- In the New variable dialog define the following variable information and click Add to add the new variable:
-
Create a new directory named
WorkSet_Dgnws_Files in the following location:
C:\Programdata\Bentley\BRCM CONNECT Edition\Configuration\WorkSpaces
-
In the Edit Value dialog that displays, set the following
values and click
OK:
- Operation type: '=' - Assignment
- Value type: Directory
- Value: Specify the path for the WorkSet_Dgnws_Files folder created above.
Important: In the process of creating a workset in BRCM CE, a workset configuration file (<worksetname>.cfg) and a corresponding DGN workset file (<worksetname>.dgnws) are created. BRCM will look for the <worksetname>.dgnws file in the same folder as the <worksetname>.cfg file. Therefore, when setting up a managed configuration, remove the existing <worksetname>.dgnws file from the local configuration and from ProjectWise in order to create <worksetname>.dgnws file and use from the location defined by _USTN_WORKSETDGNWSROOT variable in the CSB. - After clicking OK in New variable dialog, review the properties and click OK.